With 2 x 1200 W @ 4 Ohms and 2 x 1800 W @ 2 Ohms, the Q1212 offers the horsepower to challenge the legendary P3000. It provides the same power from a 2 RU chassis at modest weight, making it a perfect subwoofer or high-power top drive for Phoenix, Tour X and Zx3/Zx5 systems or system combinations.
- Designed for Club Sound, Concert Sound, Performance & Sports Venues, Pro Music, and other applications.
- Up to 2 x 2400 W into 2 ohms
- XLR pass-though input connections
- The NL4 connection on output A also carries output B on pins +/- 2 to allow easy connection to bi-amped loudspeakers
- Switchable LPN filter extra tonal fundamentals and “kick” with a protective low-cut for 12” or 15” loudspeakers without additional subwoofers
- Class-H design
- Three-stage front-to-rear fans
- Complete protection package
- Classic EV amplifier dynamic headroom for real-world music and applications
- Built-in dynamic limiters
| Amplifier Gain |
32 dB |
| Continuous Rated Power (1 kHz, THD 1%) 2Ω |
1800 Watts |
| Continuous Rated Power (1 kHz, THD 1%) 4Ω |
1200 Watts |
| Continuous Rated Power (1 kHz, THD 1%) 8Ω |
750 Watts |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω |
1100 Watts |
| Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω |
550 Watts |
| Cooling |
Front-to-Rear, 3-stage fans |
| DIM 30 |
0.05 % |
| Electronics Type |
Amplifier |
| Frequency Response |
10 Hz - 40 kHz |
| Input Impedance (Balanced) |
20 kΩ |
| Input Sensitivity |
+6.6 dBu |
| Intermodulation Distortion (SMPTE) |
0.1 % |
| Mains Voltage |
100 V, 120 V, 230 V or 240 V; 50-60 Hz (factory configured) |
| Maximum Bridged Output 4Ω |
3600 Watts |
| Maximum Bridged Output 8Ω |
2400 Watts |
| Maximum Input Voltage |
+21 dBu (8.69 Vrms) |
| Network Control (IRIS-Net) |
No |
| Signal-to-Noise Ratio (A-weighted) |
110 dB |
| Slew Rate |
30 V/µs |
| Height |
2RU 88.1 mm (3.47") |
| Width |
483 mm (19.02") |
| Depth |
421.5 mm (16.59") |
| Weight Net |
17.7 kg (39.02 lbs) |
